Safety Equipment for the Glass Industry

All Products

List Grid

Set Descending Direction

1-10 of 101

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Banom® PowerTrac® 5010 Glove Liner Fully Coated 10" on MaxPly® Dynamax® - ANSI Cut Level 2 - Dozen
    $84.60
    1 Dozen Pack at $7.05 a pair.
    PowerTrac® Fully Coated 10" on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  2. Banom® Razer® - ArmorPlate™ 9105 Glove with Polyurethane Palm Coating - ANSI Cut Level 4 - Dozen
    $100.26
    1 Dozen Pack at $8.36 a pair.
    Banom® Razer® gloves are very similar in comfort and dexterity to our best selling Terminator® glove, but with a higher level of cut resistance that allows these gloves to provide a broader range of protection. These gloves are made with ArmorPlate™, which is an HTF(High Tenacity Filament)® yarn that also has a dulling action. The combination of high tensile strength and yarn hardness allows this product to resist the cutting edges of sheet metal, glass, and knife blades. Areas for use include paper mills, extruded film manufacturing, and plastic injection molding operations where knives are used for trimming and dexterity is a necessary requirement. Their high tensile strength makes Razer® gloves ideal for use in sheet metal assembly or glass window and door assembly. When you are not sure of the hazard that you may encounter, ArmorPlate™ provides the higher level of protection that you may need. The special palm coating is non-sticky so gloves can slide along paper stock being slit, and will resist sticking to nuts, bolts, or screws being driven with a power tool in assembly applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. Available in sizes 5 through 13, Razer® gloves provide an exact fit for comfort and dexterity. Learn More
  3. Banom® Razer® - ArmorPlate™ 9105 Glove with Polyurethane Palm Coating -ANSI Cut Level 4 - 12 Dozen Case
    $1,182.24
    12 Dozen Case at $8.21 a pair.
    Banom® Razer® gloves are very similar in comfort and dexterity to our best selling Terminator® glove, but with a higher level of cut resistance that allows these gloves to provide a broader range of protection. These gloves are made with ArmorPlate™, which is an HTF(High Tenacity Filament)® yarn that also has a dulling action. The combination of high tensile strength and yarn hardness allows this product to resist the cutting edges of sheet metal, glass, and knife blades. Areas for use include paper mills, extruded film manufacturing, and plastic injection molding operations where knives are used for trimming and dexterity is a necessary requirement. Their high tensile strength makes Razer® gloves ideal for use in sheet metal assembly or glass window and door assembly. When you are not sure of the hazard that you may encounter, ArmorPlate™ provides the higher level of protection that you may need. The special palm coating is non-sticky so gloves can slide along paper stock being slit, and will resist sticking to nuts, bolts, or screws being driven with a power tool in assembly applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. Available in sizes 5 through 13, Razer® gloves provide an exact fit for comfort and dexterity. Learn More
  4. Banom® SteelGard® 7200 Glove - Heavy Weight-Spiral Wrapped Stainless Steel - Double Strand - 12 Each Pack
    $102.60
    12 Pack at $8.55 each.
    Banom® SteelGard® liners provide the highest level of cut protection from knife blades that we can offer. These liners are knit with two yarns instead of one. This double strand construction provides a fail-safe: if one strand breaks, the second acts as a backup. There are two strands of spiral wrapped stainless steel in each core yarn for a total of four in each glove. SteelGard® gloves are designed for use in food processing operations where sharp blades are present, or in general industry where hands come in contact with sharp edges. These gloves are made entirely of FDA accepted materials required by USDA for food use, and contain AlphaSan® - a permanent anti-microbial that kills bacteria, fungus, mold, and mildew. NOTE: These gloves contain stainless steel, which can make them potentially conductive in an electrical hazard situation. Learn More
  5. Banom® PowerTrac® 5005 Palm Coating on MaxPly® Dynamax® Glove Liner - ANSI Cut Level 2
    $75.60
    1 Dozen Pack at $6.30 a pair.
    PowerTrac® Palm Coating on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  6. Banom® PowerTrac® 5005 Glove Palm Coating on MaxPly® Dynamax® Liner - ANSI Cut Level 2 - 6 Dozen Case
    $453.60
    6 Dozen Case at $6.30 a pair.
    PowerTrac® Palm Coating on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  7. Banom®  Duramax® 4005 Glove Cut Resistant - ANSI Cut Level A4 - Dozen
    $85.20
    1 Dozen Pack at $7.10 a pair.
    Banom® Duramax® gloves are designed for use in areas where shop knives are being used for wire splicing. The special neoprene coated palm gives a positive grip in oily, wet, or dry applications. These gloves are flexible and comfortable to wear and are ideal for use in outdoor applications by telephone, cable, and utility workers. Learn More
  8. Banom® Duramax® 4005 Glove Cut Resistant Cut Level A4 - 6 Dozen Case
    $504.00
    6 Dozen Case at $7.00 a pair.
    Banom® Duramax® gloves are designed for use in areas where shop knives are being used for wire splicing. The special neoprene coated palm gives a positive grip in oily, wet, or dry applications. These gloves are flexible and comfortable to wear and are ideal for use in outdoor applications by telephone, cable, and utility workers. Learn More
  9. Banom® Maximizer™ 1305 Glove - HTF® Dynamax™ with Polyurethane Palm Coating - ANSI Level 2 - Dozen
    $58.20
    1 Dozen Pack at $4.85 a pair.
    Banom® Maximizer™™ gloves are cool and comfortable to wear. These cut-resistant gloves have proven to be safe, durable, and cost effective in sheet metal and electrical assembly operations where dexterity is required. The special palm coating provides a good grip in oily, wet or dry applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. With 11 sizes available, workers can get an exact fit in order to do their job safely without removing their gloves. Maximizer™ gloves can be reconditioned repeatedly with the Bantex® process. Learn More
  10. Banom® Apex® - Lightweight Dynamax® 52 - ANSI/ISEA 105-2016 Cut Level A5 - 6 Dozen Case
    $576.00
    6 Dozen Case at $8.00 a pair.
    Banom® Apex® gloves provide the maximum cut resistance that we offer in a lightweight, flexible, and durable glove. A special palm coating provides a positive grip on oily, wet or dry surfaces and is impregnated into the knit cloth for extended wear and durability. Apex® gloves feature a double layer construction. This design increases cut resistance without sacrificing dexterity or tactile feel. These gloves are not designed for use in food handling. Apex® gloves should be edge-tested prior to approval for use. Learn More

List Grid

Set Descending Direction

1-10 of 101

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5