Safety Equipment for the Glass Industry

All Products

Items 1 to 10 of 32 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Descending Direction
  1. Banom® Dynamax®45™ 4505 Glove with Non-Marring Palm Coating - ANSI Cut Level 4 - Dozen

    Banom® Dynamax®45™ 4505 Glove with Non-Marring Palm Coating - ANSI Cut Level 4 - Dozen

    1 Dozen Pack at $6.51 a pair.

    Style 45® gloves are made with Dynamax®45™ yarn and have a special non-marring palm coating, which makes them ideal for use in glass handling. This coating works well in the metal industry when handling metal parts coated with surfactant or water based lubricants. The Dynamax®45™ yarn combines tensile strength with a dulling action to provide additional protection from shop knives. Learn More
  2. Banom® Dominator® - MaxPly® Dynamax®HD 5110 Glove with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 - 6 Dozen Case

    Banom® Dominator® - MaxPly® Dynamax®HD 5110 Glove with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 - 6 Dozen Case

    6 Dozen Case at $7.24 a pair.

    Dominator® gloves offer the comfort and dexterity of Terminator® gloves with the added padding that a foam nitrile coating can provide. Fully coated styles are liquid resistant and thus are ideal for use when hydrocarbon-based lubricants are plentiful. The MaxPly® Dynamax®HD shell helps provide cut protection from light weight sheet metal hazards while the foam nitrile coating provides a good grip in oily applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. Due to their tacky grip, these gloves are not recommended for use when turning nuts, bolts, or screws with a power tool as this can result in a "wrap-up." Learn More
  3. Banom® PowerTrac® 5005 Palm Coating on MaxPly® Dynamax® Glove Liner - ANSI Cut Level 2

    Banom® PowerTrac® 5005 Palm Coating on MaxPly® Dynamax® Glove Liner - ANSI Cut Level 2

    1 Dozen Pack at $5.84 a pair.

    PowerTrac® Palm Coating on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  4. Banom® MaxPlus® 1705 Glove - ANSI Cut Level 2 - Dozen

    Banom® MaxPlus® 1705 Glove - ANSI Cut Level 2 - Dozen

    1 Dozen Pack at $6.10 a pair.

    Banom® MaxPlus® are designed for use in sheet metal assembly and metal stamping where there is a desire to use one glove in both operations due to employee rotation. Banom® MaxPlus® has a reinforced thumb crotch. Product is 100% latex free. Banom® Taperfit® cuffs are extended to protect the wrist area. Learn More
  5. Banom® PowerTrac® 5010 Glove Fully Coated 10" on MaxPly® Dynamax® Liner - ANSI Cut Level 2 - 6 Dozen Case

    Banom® PowerTrac® 5010 Glove Fully Coated 10" on MaxPly® Dynamax® Liner - ANSI Cut Level 2 - 6 Dozen Case

    6 Dozen Case at $6.90 a pair.

    PowerTrac® Fully Coated 10" on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  6. Banom® TriMax® 4200 Glove - ANSI Cut Level 4 - 12 Each Pack

    Banom® TriMax® 4200 Glove - ANSI Cut Level 4 - 12 Each Pack

    12 Pack at $8.81 each.

    TriMax® is our lightest weight and most popular cut-resistant liner. Each glove is knit with two strands of cut-resistant yarn instead of one. If the first strand fails, the second is there as a backup. These liners are extremely light weight so they can be comfortably worn underneath cover gloves. These gloves are made entirely of FDA accepted materials required by USDA for food use and contain AlphaSan®, a permanent antimicrobial that kills bacteria, fungus, mold, and mildew. Applications include food processing and food service where cut-resistant liners are worn underneath cover gloves. When handling glass, these liners can be used for additional cut protection. Learn More
  7. Banom® Dominator® - MaxPly® Dynamax®HD 5100 Glove with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 - 6 Dozen Case

    Banom® Dominator® - MaxPly® Dynamax®HD 5100 Glove with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 - 6 Dozen Case

    6 Dozen Case at $7.05 a pair.

    Dominator® gloves offer the comfort and dexterity of Terminator® gloves with the added padding that a foam nitrile coating can provide. Fully coated styles are liquid resistant and thus are ideal for use when hydrocarbon-based lubricants are plentiful. The MaxPly® Dynamax®HD shell helps provide cut protection from light weight sheet metal hazards while the foam nitrile coating provides a good grip in oily applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. Due to their tacky grip, these gloves are not recommended for use when turning nuts, bolts, or screws with a power tool as this can result in a "wrap-up. Learn More
  8. Banom® 4005 Glove Cut Resistant - ANSI Cut Level4® - Dozen

    Banom® 4005 Glove Cut Resistant - ANSI Cut Level4® - Dozen

    1 Dozen Pack at $7.12 a pair.

    Banom® Level4® gloves are designed for use in areas where shop knives are being used for wire splicing. The special neoprene coated palm gives a positive grip in oily, wet, or dry applications. These gloves are flexible and comfortable to wear and are ideal for use in outdoor applications by telephone, cable, and utility workers. Learn More
  9. Banom® 7712 Hand Pad ANSI Cut Level 3 - 12 Each Pack

    Banom® 7712 Hand Pad ANSI Cut Level 3 - 12 Each Pack

    12 Pack at $0.74 each.

    Banom® 7712 Hand Pad Learn More
  10. Banom® Dominator® - MaxPly® Dynamax® 5105 with Foam Nitrile Coating ANSI Cut Level 2 - 12 Dozen Case

    Banom® Dominator® - MaxPly® Dynamax® 5105 with Foam Nitrile Coating ANSI Cut Level 2 - 12 Dozen Case

    12 Dozen Case at $5.69 a pair.

    Dominator® - MaxPly® Dynamax® with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 Learn More

Items 1 to 10 of 32 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Descending Direction