Safety Equipment for the Glass Industry

All Products

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. Banom® Dynamax®45 ™ 4505 Glove with Non-Marring Palm Coating - ANSI Cut Level 4 - 6 Dozen

    Banom® Dynamax®45 ™ 4505 Glove with Non-Marring Palm Coating - ANSI Cut Level 4 - 6 Dozen

    6 Dozen Case at $6.36 a pair.

    Style 45® gloves are made with Dynamax®45™ yarn and have a special non-marring palm coating, which makes them ideal for use in glass handling. This coating works well in the metal industry when handling metal parts coated with surfactant or water based lubricants. The Dynamax®45™ yarn combines tensile strength with a dulling action to provide additional protection from shop knives. Learn More
  2. Banom® Razer® - ArmorPlate™ 9105 Glove with Polyurethane Palm Coating - ANSI Cut Level 4 - Dozen

    Banom® Razer® - ArmorPlate™ 9105 Glove with Polyurethane Palm Coating - ANSI Cut Level 4 - Dozen

    1 Dozen Pack at $8.36 a pair.

    Banom® Razer® gloves are very similar in comfort and dexterity to our best selling Terminator® glove, but with a higher level of cut resistance that allows these gloves to provide a broader range of protection. These gloves are made with ArmorPlate™, which is an HTF(High Tenacity Filament)® yarn that also has a dulling action. The combination of high tensile strength and yarn hardness allows this product to resist the cutting edges of sheet metal, glass, and knife blades. Areas for use include paper mills, extruded film manufacturing, and plastic injection molding operations where knives are used for trimming and dexterity is a necessary requirement. Their high tensile strength makes Razer® gloves ideal for use in sheet metal assembly or glass window and door assembly. When you are not sure of the hazard that you may encounter, ArmorPlate™ provides the higher level of protection that you may need. The special palm coating is non-sticky so gloves can slide along paper stock being slit, and will resist sticking to nuts, bolts, or screws being driven with a power tool in assembly applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. Available in sizes 5 through 13, Razer® gloves provide an exact fit for comfort and dexterity. Learn More
  3. Banom® SafeLite® - Dynamax®45 9005 Glove with Solid Nitrile Palm Coating - ANSI Cut Level 4 - 6 Dozen Case

    Banom® SafeLite® - Dynamax®45 9005 Glove with Solid Nitrile Palm Coating - ANSI Cut Level 4 - 6 Dozen Case

    6 Dozen Case at $6.36 a pair.

    Banom® SafeLite® gloves provide a positive grip on dry flat surfaces that can be sharp. Originally designed for handling sheet glass, these gloves have also become popular in the paper and corrugated industries where cardboard panels are being cut with knives. A solid nitrile palm coating resists punctures and provides a tacky grip to ensure a positive dry surface contact. Gloves that grip well keep sharp edges from moving, thus increasing cut resistance. Applications include trimming operations in paper mills, cardboard manufacturing, plastic mold trimming, and glass window and door assembly. Due to their tacky grip, these gloves are not recommended for use when turning nuts, bolts, or screws with a power tool as this can result in a "wrap-up." Learn More
  4. Banom® 4005 Glove Cut Resistant - ANSI Cut Level4® - Dozen

    Banom® 4005 Glove Cut Resistant - ANSI Cut Level4® - Dozen

    1 Dozen Pack at $7.12 a pair.

    Banom® Level4® gloves are designed for use in areas where shop knives are being used for wire splicing. The special neoprene coated palm gives a positive grip in oily, wet, or dry applications. These gloves are flexible and comfortable to wear and are ideal for use in outdoor applications by telephone, cable, and utility workers. Learn More
  5. Banom® Dynamax®45™ 4505 Glove with Non-Marring Palm Coating - ANSI Cut Level 4 - Dozen

    Banom® Dynamax®45™ 4505 Glove with Non-Marring Palm Coating - ANSI Cut Level 4 - Dozen

    1 Dozen Pack at $6.51 a pair.

    Style 45® gloves are made with Dynamax®45™ yarn and have a special non-marring palm coating, which makes them ideal for use in glass handling. This coating works well in the metal industry when handling metal parts coated with surfactant or water based lubricants. The Dynamax®45™ yarn combines tensile strength with a dulling action to provide additional protection from shop knives. Learn More
  6. Banom® SafeLite® - Dynamax®45 9005 Glove with Solid Nitrile Palm Coating -ANSI Cut Level 4 - Dozen

    Banom® SafeLite® - Dynamax®45 9005 Glove with Solid Nitrile Palm Coating -ANSI Cut Level 4 - Dozen

    1 Dozen Pack at $6.51 a pair.

    Banom® SafeLite® gloves provide a positive grip on dry flat surfaces that can be sharp. Originally designed for handling sheet glass, these gloves have also become popular in the paper and corrugated industries where cardboard panels are being cut with knives. A solid nitrile palm coating resists punctures and provides a tacky grip to ensure a positive dry surface contact. Gloves that grip well keep sharp edges from moving, thus increasing cut resistance. Applications include trimming operations in paper mills, cardboard manufacturing, plastic mold trimming, and glass window and door assembly. Due to their tacky grip, these gloves are not recommended for use when turning nuts, bolts, or screws with a power tool as this can result in a "wrap-up." Learn More
  7. Banom® Razer® - ArmorPlate™ 9105 Glove with Polyurethane Palm Coating -ANSI Cut Level 4 - 12 Dozen Case

    Banom® Razer® - ArmorPlate™ 9105 Glove with Polyurethane Palm Coating -ANSI Cut Level 4 - 12 Dozen Case

    12 Dozen Case at $8.21 a pair.

    Banom® Razer® gloves are very similar in comfort and dexterity to our best selling Terminator® glove, but with a higher level of cut resistance that allows these gloves to provide a broader range of protection. These gloves are made with ArmorPlate™, which is an HTF(High Tenacity Filament)® yarn that also has a dulling action. The combination of high tensile strength and yarn hardness allows this product to resist the cutting edges of sheet metal, glass, and knife blades. Areas for use include paper mills, extruded film manufacturing, and plastic injection molding operations where knives are used for trimming and dexterity is a necessary requirement. Their high tensile strength makes Razer® gloves ideal for use in sheet metal assembly or glass window and door assembly. When you are not sure of the hazard that you may encounter, ArmorPlate™ provides the higher level of protection that you may need. The special palm coating is non-sticky so gloves can slide along paper stock being slit, and will resist sticking to nuts, bolts, or screws being driven with a power tool in assembly applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. Available in sizes 5 through 13, Razer® gloves provide an exact fit for comfort and dexterity. Learn More
  8. Banom® Level4® 4005 Glove Cut Resistant Cut Level 4 - 6 Dozen Case

    Banom® Level4® 4005 Glove Cut Resistant Cut Level 4 - 6 Dozen Case

    6 Dozen Case at $6.97 a pair.

    Banom® Level4® gloves are designed for use in areas where shop knives are being used for wire splicing. The special neoprene coated palm gives a positive grip in oily, wet, or dry applications. These gloves are flexible and comfortable to wear and are ideal for use in outdoor applications by telephone, cable, and utility workers. Learn More
  9. Actifit® - ArmorPlate® with Foam Nitrile Coating - ANSI/ISEA 105-2016 Level A3 - 6 Dozen Case

    Actifit® - ArmorPlate® with Foam Nitrile Coating - ANSI/ISEA 105-2016 Level A3 - 6 Dozen Case

    6 Dozen Case at $8.97 a pair.

    Style 2005 Actifit® cut-resistant gloves are the light weight, flexible, and a provide dexterity and tactile feel. Applications include warehouse and fulfillment centers where dexterity and a positive grip are required to handle multiple parts and objects and knives may be used to cut cartons open. Style 2010 is a fully coated 10 inch cut-resistant glove(A4) designed for use in liquid applications where dexterity and a good grip are needed. Applications include engine assembly, machining of aircraft parts, and small sheet metal assembly in areas with plentiful lubricants where increased dexterity is required. Both gloves are nitrile coated on ArmorPlate®. ArmorPlate® is non-conductive and non-friable so it is an excellent replacement for the stainless steel and glass components found in other gloves. Due to their tacky grip, these gloves are not recommended for use when turning nuts, bolts, or screws with a power tool as this can result in a "wrap-up". These gloves are made with a synthetic yarn, so they should not be used near heat or open flame. Nitrile coatings can become slippery in water-based solutions. Both Actifit® gloves should be edge-tested prior to approval for use. Learn More
  10. Banom® DuraPlus® 2805 - Dynamax® 45 with Bi-Polymer Coating - ANSI Cut Level 4 - Case

    Banom® DuraPlus® 2805 - Dynamax® 45 with Bi-Polymer Coating - ANSI Cut Level 4 - Case

    6 Dozen Case at $6.36 a pair.

    Banom® DuraPlus® 2805 - Dynamax® 45 with Bi-Polymer Coating - ANSI Cut Level 4 Learn More

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction