Safety Equipment for the Glass Industry

All Products

Items 1 to 10 of 15 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. Banom® Maximizer™ 1305 Glove - HTF® Dynamax™ with Polyurethane Palm Coating ANSI Cut Level 2 - 12 Dozen Case

    Banom® Maximizer™ 1305 Glove - HTF® Dynamax™ with Polyurethane Palm Coating ANSI Cut Level 2 - 12 Dozen Case

    12 Dozen Case at $4.70 a pair.

    Banom® Maximizer™™ gloves are cool and comfortable to wear. These cut-resistant gloves have proven to be safe, durable, and cost effective in sheet metal and electrical assembly operations where dexterity is required. The special palm coating provides a good grip in oily, wet or dry applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. With 11 sizes available, workers can get an exact fit in order to do their job safely without removing their gloves. Maximizer™ gloves can be reconditioned repeatedly with the Bantex® process. Gloves cleaned with this process are bacteria free and cosmetically acceptable for re-use. Each cycle of cleaning lowers the initial cost of Maximizer™ gloves. Applications include air conditioning and appliance assembly, engine manufacturing, electrical construction, maintenance, HVAC fieldwork, and dry wall construction. These gloves do not provide the necessary grip required for handling large sheet metal panels. In these applications, the Dominator® or Vectron® style gloves are recommended. Learn More
  2. Banom® Terminator® 8305 Glove - ANSI Cut Level 2 - CPPT 565 - Soft as Silk - Strong as Steel - 12 Dozen Case

    Banom® Terminator® 8305 Glove - ANSI Cut Level 2 - CPPT 565 - Soft as Silk - Strong as Steel - 12 Dozen Case

    12 Dozen Case at $5.95 a pair.

    Banom® Terminator® gloves are cool and comfortable to wear. The MaxPly® Dyneema® liner provides cut resistance while the palm coating breathes for hand comfort. These gloves work well in areas where small glass panes are being installed into window or door frames. They also provide dexterity when assembling aluminum windows or doors. Learn More
  3. Banom® Reflex® 2403 Glove ANSI Cut Level 2 - 12 Dozen Case

    Banom® Reflex® 2403 Glove ANSI Cut Level 2 - 12 Dozen Case

    12 Dozen Case at $6.28 a pair.

    Banom® Reflex® gloves are designed for assembly areas where the forefinger and thumb dexterity is needed, but cut resistance is requires in other areas on the hand. Banom® Taperfit® cuffs are extended length to protect the wrist area. Learn More
  4. Banom® Maximizer™ 1305 Glove - HTF® Dynamax™ with Polyurethane Palm Coating - ANSI Level 2 - Dozen

    Banom® Maximizer™ 1305 Glove - HTF® Dynamax™ with Polyurethane Palm Coating - ANSI Level 2 - Dozen

    1 Dozen Pack at $4.85 a pair.

    Banom® Maximizer™™ gloves are cool and comfortable to wear. These cut-resistant gloves have proven to be safe, durable, and cost effective in sheet metal and electrical assembly operations where dexterity is required. The special palm coating provides a good grip in oily, wet or dry applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. With 11 sizes available, workers can get an exact fit in order to do their job safely without removing their gloves. Maximizer™ gloves can be reconditioned repeatedly with the Bantex® process. Gloves cleaned with this process are bacteria free and cosmetically acceptable for re-use. Each cycle of cleaning lowers the initial cost of Maximizer™ gloves. Applications include air conditioning and appliance assembly, engine manufacturing, electrical construction, maintenance, HVAC fieldwork, and dry wall construction. These gloves do not provide the necessary grip required for handling large sheet metal panels. In these applications, the Dominator® or Vectron® style gloves are recommended. Learn More
  5. Banom® Dynamax® HD sleeves ANSI Level 2 - 50 Pack

    Banom® Dynamax® HD sleeves ANSI Level 2 - 50 Pack

    Starting at:

    50 Pack at $3.46 each.

    S17 Series sleeves handle a broad range of sheet metal and sheet glass applications. These sleeves are made with Dynamax® HD, a lightweight continuous filament yarn that works on a principle of ultra high tensile strength to prevent a metal or glass edge from cutting into the fabric of the sleeves. Dynamax® HD sleeves feel silky soft to sensitive skin. Available in different weights, lengths and sizes, these sleeves provide cool, comfortable and durable protection. These sleeves are 100% latex free and can be reconditioned repeatedly using the Bantex® process. Cautions: Dynamax® HD sleeves are NOT for use near high heat or open flame, and are NOT designed to protect against knife blade hazards. Dynamax® HD sleeves should be edge tested prior to approval for use. Learn More
  6. Banom® Terminator® 8305 Glove - CPPT 565 - Soft as Silk - Strong as Steel - ANSI Cut Level 2 - Dozen

    Banom® Terminator® 8305 Glove - CPPT 565 - Soft as Silk - Strong as Steel - ANSI Cut Level 2 - Dozen

    1 Dozen Pack at $6.10 a pair.

    Banom® Terminator® gloves are cool and comfortable to wear. The MaxPly® Dyneema® liner provides cut resistance while the palm coating breathes for hand comfort. These gloves work well in areas where small glass panes are being installed into window or door frames. They also provide dexterity when assembling aluminum windows or doors. Learn More
  7. Banom® Reflex® 2403 Glove - ANSI Cut Level 2 - Dozen

    Banom® Reflex® 2403 Glove - ANSI Cut Level 2 - Dozen

    1 Dozen Pack at $6.43 a pair.

    Banom® Reflex® gloves are designed for assembly areas where the forefinger and thumb dexterity is needed, but cut resistance is requires in other areas on the hand. Banom® Taperfit® cuffs are extended length to protect the wrist area. Learn More
  8. Banom® Conductor® 8405 Glove - ANSI Cut Level 2 - 12 Dozen Case

    Banom® Conductor® 8405 Glove - ANSI Cut Level 2 - 12 Dozen Case

    12 Dozen Case at $9.25 a pair.

    Banom® Conductor® Learn More
  9. S9724-TS-L  - Banom® Abratex® 24" Jumbo Tube Sleeves with Tumb Slot -100 Pack

    S9724-TS-L - Banom® Abratex® 24" Jumbo Tube Sleeves with Tumb Slot -100 Pack

    100 Pack at $3.27 each.

    Banom® Abratex® 24" Jumbo Tube Sleeves with Tumb Slot Learn More
  10. Banom® Flash 'n Slash® - ANSI Cut Level 4 - Dozen

    Banom® Flash 'n Slash® - ANSI Cut Level 4 - Dozen

    1 Dozen Pack at $10.38 a pair.

    Flash 'n Slash® gloves and sleeves are designed for cut resistance in sheet metal, glass and knife blade hazards where there is a potential exposure to heat, sparks, and open flame. These products are made with Fyron 45, a continuous filament yarn that combines ultra high tensile strength with a yarn hardness that allows this product line to resist the cutting edges of sheet metal, machined metal, glass, and knife blades. This yarn and the special palm coating used in style DP-6705 are inherently flame resistant. Flash 'n Slash gloves and sleeves are 100% latex free. Due to their tacky grip, style DP-6705 gloves are not recommended for use when turning nuts, bolts, and screws with a power tool as this can result in a "wrap-up." Flash 'n Slash gloves and sleeves should be edge-tested prior to approval for use. Learn More

Items 1 to 10 of 15 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction