Safety Equipment for the Glass Industry

All Products

Items 1 to 10 of 24 total

per page
Page:
  1. 1
  2. 2
  3. 3

List  Grid 

Set Descending Direction
  1. Banom® Dominator® - MaxPly® Dynamax®HD 5100 Glove with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 - 6 Dozen Case

    Banom® Dominator® - MaxPly® Dynamax®HD 5100 Glove with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 - 6 Dozen Case

    6 Dozen Case at $7.05 a pair.

    Dominator® gloves offer the comfort and dexterity of Terminator® gloves with the added padding that a foam nitrile coating can provide. Fully coated styles are liquid resistant and thus are ideal for use when hydrocarbon-based lubricants are plentiful. The MaxPly® Dynamax®HD shell helps provide cut protection from light weight sheet metal hazards while the foam nitrile coating provides a good grip in oily applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. Due to their tacky grip, these gloves are not recommended for use when turning nuts, bolts, or screws with a power tool as this can result in a "wrap-up. Learn More
  2. Banom® PowerTrac® 5005 Palm Coating on MaxPly® Dynamax® Glove Liner - ANSI Cut Level 2

    Banom® PowerTrac® 5005 Palm Coating on MaxPly® Dynamax® Glove Liner - ANSI Cut Level 2

    1 Dozen Pack at $5.84 a pair.

    PowerTrac® Palm Coating on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  3. Banom® PowerTrac® 5010 Glove Fully Coated 10" on MaxPly® Dynamax® Liner - ANSI Cut Level 2 - 6 Dozen Case

    Banom® PowerTrac® 5010 Glove Fully Coated 10" on MaxPly® Dynamax® Liner - ANSI Cut Level 2 - 6 Dozen Case

    6 Dozen Case at $6.90 a pair.

    PowerTrac® Fully Coated 10" on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  4. Banom® Dominator® - MaxPly® Dynamax® 5105 with Foam Nitrile Coating ANSI Cut Level 2 - 12 Dozen Case

    Banom® Dominator® - MaxPly® Dynamax® 5105 with Foam Nitrile Coating ANSI Cut Level 2 - 12 Dozen Case

    12 Dozen Case at $5.69 a pair.

    Dominator® - MaxPly® Dynamax® with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 Learn More
  5. Banom® Dominator® - MaxPly® Dynamax®HD 5110 Glove with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 - Dozen

    Banom® Dominator® - MaxPly® Dynamax®HD 5110 Glove with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 - Dozen

    1 Dozen Pack at $7.39 a pair.

    Dominator® gloves offer the comfort and dexterity of Terminator® gloves with the added padding that a foam nitrile coating can provide. Fully coated styles are liquid resistant and thus are ideal for use when hydrocarbon-based lubricants are plentiful. The MaxPly® Dynamax®HD shell helps provide cut protection from light weight sheet metal hazards while the foam nitrile coating provides a good grip in oily applications. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. Due to their tacky grip, these gloves are not recommended for use when turning nuts, bolts, or screws with a power tool as this can result in a "wrap-up." Learn More
  6. Banom® Dominator® 5205 Glove RTC - ANSI Cut Level 2 - 12 Dozen Case

    Banom® Dominator® 5205 Glove RTC - ANSI Cut Level 2 - 12 Dozen Case

    12 Dozen Case at $6.00 a pair.

    Banom® Dominator® with reinforced thumb crotch. Learn More
  7. Banom® Dominator® - MaxPly® Dynamax®HD 5100 Glove with Foam Nitrile Coating - ANSI Cut Level 2 - Dozen

    Banom® Dominator® - MaxPly® Dynamax®HD 5100 Glove with Foam Nitrile Coating - ANSI Cut Level 2 - Dozen

    1 Dozen Pack at $7.20 a pair.

    Dominator® - MaxPly® Dynamax®HD with Foam Nitrile Coating Learn More
  8. Magnum® - Dynamax® HD with Leather Palm - ANSI/ISEA 105-2016 Cut Level A3

    Magnum® - Dynamax® HD with Leather Palm - ANSI/ISEA 105-2016 Cut Level A3

    6 Dozen Case at $9.33 a pair.

    Magnum® - Dynamax® HD with Leather Palm - ANSI/ISEA 105-2016 Cut Level A3 Magnum® gloves provide higher cut hazard protection in sheet metal applications that require a leather palm for positive grip and abrasion resistance. Style 6305 Magnum® gloves are knit with four strands of Dynamax® HD continuous filament yarn for a total tensile strength of 672 Newtons. Tensile strength is needed to resist the burrs on stamped, punched, or pressed sheet metal edges. These gloves are made with a synthetic yarn, so they should not be used near heat or open flame. They are not recommended for use in applications where nuts, bolts, or screws are being turned with a power tool as a metal flashing could trap in the knit cloth and cause a "wrap-up." Magnum® 6305 gloves should be edge-tested prior to approval for use. Learn More
  9. Banom® PowerTrac® 5010 Glove Liner Fully Coated 10" on MaxPly® Dynamax® - ANSI Cut Level 2 - Dozen

    Banom® PowerTrac® 5010 Glove Liner Fully Coated 10" on MaxPly® Dynamax® - ANSI Cut Level 2 - Dozen

    1 Dozen Pack at $7.05 a pair.

    PowerTrac® Fully Coated 10" on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  10. Banom® Dominator® - MaxPly® Dynamax® 5105 Glove with Foam Nitrile Coating - ANSI Cut Level 2 - Dozen

    Banom® Dominator® - MaxPly® Dynamax® 5105 Glove with Foam Nitrile Coating - ANSI Cut Level 2 - Dozen

    1 Dozen Pack at $5.84 a pair.

    Dominator® - MaxPly® Dynamax® with Foam Nitrile Coating - ANSI Cut Level 2, EN 388 - 4342 Learn More

Items 1 to 10 of 24 total

per page
Page:
  1. 1
  2. 2
  3. 3

List  Grid 

Set Descending Direction