Safety Equipment for the Glass Industry

All Products

Items 1 to 10 of 109 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Descending Direction
  1. Banom® PowerTrac® 5010 Glove Liner Fully Coated 10" on MaxPly® Dynamax® - ANSI Cut Level 2 - Dozen

    Banom® PowerTrac® 5010 Glove Liner Fully Coated 10" on MaxPly® Dynamax® - ANSI Cut Level 2 - Dozen

    1 Dozen Pack at $7.05 a pair.

    PowerTrac® Fully Coated 10" on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  2. Banom® Gray Soft Duralon® 8605 Glove with Badger Paw® Grip and Micro Dots - ANSI Cut Level 0 - 6 Dozen Case

    Banom® Gray Soft Duralon® 8605 Glove with Badger Paw® Grip and Micro Dots - ANSI Cut Level 0 - 6 Dozen Case

    6 Dozen Case at $1.71 a pair.

    Special soft Duralon® yarn stretches across the hand for an exact fit without compromising hand comfort. Micro dots protect knit fabric from abrasive objects, yet are small enough that they do not interfere with hand sensitivity to touch or feel. Breathable Duralon® knit keeps hands cool in summer and warm in winter. Applications include light assembly where dexterity and manual sensitivity are desirable. Excellent for shipping and receiving departments that handle cartons and must enter data on keypads. Gloves provide insulation from cold and are thus ideal for delivering cartons and packages during winter months. Not recommended for use when turning nuts, bolts, or screws with an automatic tool as a metal flashing or burr can catch in the open knit cloth. Learn More
  3. Banom® 7712 Hand Pad ANSI Cut Level 3 - 12 Each Pack

    Banom® 7712 Hand Pad ANSI Cut Level 3 - 12 Each Pack

    12 Pack at $0.74 each.

    Banom® 7712 Hand Pad Learn More
  4. Banom® Abratex® 7712 Glove Cotton Terrycloth with Duralon® Reinforced Thumb Crotch - ANSI Cut Level 3 - Dozen

    Banom® Abratex® 7712 Glove Cotton Terrycloth with Duralon® Reinforced Thumb Crotch - ANSI Cut Level 3 - Dozen

    1 Dozen Pack at $2.51 a pair.

    Banom® These terrycloth gloves are designed for stamping and sheet metal fabrication operations where punched metal parts are oily. The gloves feature a continuous cuff for added protection to the wrist area. Full Duralon® reinforcement along thumb and index finger increases durability in the area of the glove most subject to wear. Cotton loops provide a good grip on oily surfaces, Abratex® yarn in loop resists cuts from metal edges. Gloves are gray in color to aid in reconditioning. The cuffs are color coded for easy size identification. A full size range ensures a proper fit. Learn More
  5. Banom® Abratex® 7712 Glove Cotton Terrycloth with Duralon® Reinforced Thumb Crotch - ANSI Cut Level 3 - 3 Dozen Case

    Banom® Abratex® 7712 Glove Cotton Terrycloth with Duralon® Reinforced Thumb Crotch - ANSI Cut Level 3 - 3 Dozen Case

    3 Dozen Case at $2.36 a pair.

    Banom® These terrycloth gloves are designed for stamping and sheet metal fabrication operations where punched metal parts are oily. The gloves feature a continuous cuff for added protection to the wrist area. Full Duralon® reinforcement along thumb and index finger increases durability in the area of the glove most subject to wear. Cotton loops provide a good grip on oily surfaces, Abratex® yarn in loop resists cuts from metal edges. Gloves are gray in color to aid in reconditioning. The cuffs are color coded for easy size identification. A full size range ensures a proper fit. Learn More
  6. Banom® SteelGard® 7200 Glove - Heavy Weight-Spiral Wrapped Stainless Steel - Double Strand - 12 Each Pack

    Banom® SteelGard® 7200 Glove - Heavy Weight-Spiral Wrapped Stainless Steel - Double Strand - 12 Each Pack

    12 Pack at $9.71 each.

    Banom® SteelGard® liners provide the highest level of cut protection from knife blades that we can offer. These liners are knit with two yarns instead of one. This double strand construction provides a fail-safe: if one strand breaks, the second acts as a backup. There are two strands of spiral wrapped stainless steel in each core yarn for a total of four in each glove. SteelGard® gloves are designed for use in food processing operations where sharp blades are present, or in general industry where hands come in contact with sharp edges. These gloves are made entirely of FDA accepted materials required by USDA for food use, and contain AlphaSan® - a permanent anti-microbial that kills bacteria, fungus, mold, and mildew. NOTE: These gloves contain stainless steel, which can make them potentially conductive in an electrical hazard situation. Learn More
  7. Magnum® - Dynamax® HD with Leather Palm - ANSI/ISEA 105-2016 Cut Level A3

    Magnum® - Dynamax® HD with Leather Palm - ANSI/ISEA 105-2016 Cut Level A3

    1 Dozen Pack at $9.58 a pair.

    Magnum® - Dynamax® HD with Leather Palm - ANSI/ISEA 105-2016 Cut Level A3 Magnum® gloves provide higher cut hazard protection in sheet metal applications that require a leather palm for positive grip and abrasion resistance. Style 6305 Magnum® gloves are knit with four strands of Dynamax® HD continuous filament yarn for a total tensile strength of 672 Newtons. Tensile strength is needed to resist the burrs on stamped, punched, or pressed sheet metal edges. These gloves are made with a synthetic yarn, so they should not be used near heat or open flame. They are not recommended for use in applications where nuts, bolts, or screws are being turned with a power tool as a metal flashing could trap in the knit cloth and cause a "wrap-up." Magnum® 6305 gloves should be edge-tested prior to approval for use. Learn More
  8. Magnum® - Dynamax® HD with Leather Palm - ANSI/ISEA 105-2016 Cut Level A3

    Magnum® - Dynamax® HD with Leather Palm - ANSI/ISEA 105-2016 Cut Level A3

    6 Dozen Case at $9.33 a pair.

    Magnum® - Dynamax® HD with Leather Palm - ANSI/ISEA 105-2016 Cut Level A3 Magnum® gloves provide higher cut hazard protection in sheet metal applications that require a leather palm for positive grip and abrasion resistance. Style 6305 Magnum® gloves are knit with four strands of Dynamax® HD continuous filament yarn for a total tensile strength of 672 Newtons. Tensile strength is needed to resist the burrs on stamped, punched, or pressed sheet metal edges. These gloves are made with a synthetic yarn, so they should not be used near heat or open flame. They are not recommended for use in applications where nuts, bolts, or screws are being turned with a power tool as a metal flashing could trap in the knit cloth and cause a "wrap-up." Magnum® 6305 gloves should be edge-tested prior to approval for use. Learn More
  9. Banom® PowerTrac® 5005 Palm Coating on MaxPly® Dynamax® Glove Liner - ANSI Cut Level 2

    Banom® PowerTrac® 5005 Palm Coating on MaxPly® Dynamax® Glove Liner - ANSI Cut Level 2

    1 Dozen Pack at $5.84 a pair.

    PowerTrac® Palm Coating on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More
  10. Banom® PowerTrac® 5005 Glove Palm Coating on MaxPly® Dynamax® Liner - ANSI Cut Level 2 - 6 Dozen Case

    Banom® PowerTrac® 5005 Glove Palm Coating on MaxPly® Dynamax® Liner - ANSI Cut Level 2 - 6 Dozen Case

    6 Dozen Case at $5.69 a pair.

    PowerTrac® Palm Coating on MaxPly® Dynamax® Liner - ANSI Level 2 Learn More

Items 1 to 10 of 109 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Descending Direction